BACK TO SQUARE ONE!!!

Moderator: Panzer Corps 2 Moderators

Post Reply
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

LoginId:34fb52704e15e60bf14741bcb3c9e45f
EpicAccountId:

LowLevelFatalError [File:Unknown] [Line: 198] Unreal Engine is exiting due to D3D device being lost. (Error: 0x887A0006 - 'HUNG')

PanzerCorps2_Win64_Shipping!FD3D11EventQuery::WaitForCompletion()
PanzerCorps2_Win64_Shipping!FD3D11DynamicRHI::RHIEndDrawingViewport()
PanzerCorps2_Win64_Shipping!FRHICommandListExecutor::ExecuteInner_DoExecute()
PanzerCorps2_Win64_Shipping!FRHICommandListExecutor::ExecuteInner()
PanzerCorps2_Win64_Shipping!FRHICommandList::EndDrawingViewport()
PanzerCorps2_Win64_Shipping!FSlateRHIRenderer::DrawWindow_RenderThread()
PanzerCorps2_Win64_Shipping!FRHICommand<FSlateEndDrawingWindowsCommand,FSlateEndDrawingWindowsCommandString>::ExecuteAndDestruct()
PanzerCorps2_Win64_Shipping!FNamedTaskThread::ProcessTasksUntilQuit()
PanzerCorps2_Win64_Shipping!RenderingThreadMain()
PanzerCorps2_Win64_Shipping!FRenderingThread::Run()
PanzerCorps2_Win64_Shipping!FRunnableThreadWin::Run()





I AM STILL HAVING THIS UNREAL ENGINE PROBLEM EVEN WITH A FRESH INSTALL AND UPGRADE OF PC2!!!
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

WHEN THE GAME FINALLY CAME UP ...the picture that appeared was a jumbled mess of colors barely discernable as the PC2 game....
Edmon
Slitherine
Slitherine
Posts: 534
Joined: Thu Oct 17, 2019 12:50 pm

Re: BACK TO SQUARE ONE!!!

Post by Edmon »

Jonesy1760 wrote: Fri Jun 04, 2021 5:00 am WHEN THE GAME FINALLY CAME UP ...the picture that appeared was a jumbled mess of colors barely discernable as the PC2 game....
The errors I see here are consistant with a failing or unsupported graphics card.

Can you tell me what graphics card you have?
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

I have an AMD Radeon (TM) R4 graphics...I have already updated any drivers for it....I have also turned off antivirus and firewall...no change..I still get the same problems I listed before..
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

OK...GO figure this one all you techies..MY PC2 game will play perfectly if I hold down the F1 ,F2,F3 or F4 buttons along the top left of my keyboard. Any one of those buttons if depressed will give me a normal-looking game.So is this thing haunted or is the video card underneath those buttons?...
Edmon
Slitherine
Slitherine
Posts: 534
Joined: Thu Oct 17, 2019 12:50 pm

Re: BACK TO SQUARE ONE!!!

Post by Edmon »

Jonesy1760 wrote: Sat Jun 05, 2021 2:24 am OK...GO figure this one all you techies..MY PC2 game will play perfectly if I hold down the F1 ,F2,F3 or F4 buttons along the top left of my keyboard. Any one of those buttons if depressed will give me a normal-looking game.So is this thing haunted or is the video card underneath those buttons?...
You don't have a graphics card, that is why you are seeing all kinds of funky behaviour.

Radeon R4 is a built-into-the-cpu GPU and is barely capable of playing older, weaker games.

You need an actual, real graphics card to play Panzer Corps 2. You don't meet the minimum requirements with an R4.
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

Then how come when I hold down either the f1,f2, or f3 keys on my keyboard the game graphics are perfect. And I can play the game as before....this graphics problem all started when the latest update .21 was installed in my game..I'm beginning to think this thing is haunted!!!
Patrick Ward
Slitherine
Slitherine
Posts: 1221
Joined: Thu Sep 04, 2014 2:49 pm
Location: A small island in the Outer Hebrides.

Re: BACK TO SQUARE ONE!!!

Post by Patrick Ward »

Jonesy1760 wrote: Sun Jun 06, 2021 1:25 am Then how come when I hold down either the f1,f2, or f3 keys on my keyboard the game graphics are perfect. And I can play the game as before....this graphics problem all started when the latest update .21 was installed in my game..I'm beginning to think this thing is haunted!!!
Jonesy,

Your system only has 4GB RAM and your R4, integrated graphics have none at all, so it is physically incapable of running the game 'perfectly'.

https://www.notebookcheck.net/AMD-Radeo ... 399.0.html

This is way below the minimum specs the game is advertised to run on and as such, I'm sorry to say but the team are unable to provide you with any meaningful assistance.

OS
64-bit Windows 8/10 (the game runs on Windows 7 but no support will be provided)

Processor
Intel or AMD, Dual Core or better (Requires a 64-bit processor and operating system)

Memory
8 GB ram

GPU
nVidia or AMD, 2GB VRAM

DirectX
v11

HD Space
12 GB


Pat
............................

Pat a Pixel Pusher

............................
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

ok...it runs slow but it runs...this unreal engine and the last update.21. really messed it up for me....I just hope someone has the IQ to figure out the fix because I am not the only one who has this problem..I have worked around some things to get the game to work...updated drivers and such...see my other message posted here.
VPaulus
Slitherine
Slitherine
Posts: 8326
Joined: Mon Dec 27, 2010 8:33 pm
Location: Portugal

Re: BACK TO SQUARE ONE!!!

Post by VPaulus »

It won't work well if you don't have 8GB RAM and a dedicated video card with at least 2GB VRAM.
I'm sorry but Integrated cards are good for office work and 2D games, not 3D games.
Jonesy1760
Master Sergeant - U-boat
Master Sergeant - U-boat
Posts: 516
Joined: Sat Nov 20, 2010 6:06 pm
Location: MICHIGAN,USA

Re: BACK TO SQUARE ONE!!!

Post by Jonesy1760 »

Well...then if you insist...what should I have installed on my gaming laptop???
VPaulus
Slitherine
Slitherine
Posts: 8326
Joined: Mon Dec 27, 2010 8:33 pm
Location: Portugal

Re: BACK TO SQUARE ONE!!!

Post by VPaulus »

A new laptop with a dedicated video graphic with at least 4GB VRAM and 16GB RAM.
That's a standard gaming laptop nowadays.

https://www.pcgamer.com/uk/best-gaming-laptop/
Post Reply

Return to “Panzer Corps 2: Tech Support”