New Projekt: Phcas & AKRebels "PAK"-Mod - RELEASE v3.30

[phcas]

Help Needed

Hello forum members. As you (hopefully) know are we using in the MOD Grey colors for the Wehrmacht vehicles/tanks until 1.1.1943. After 1.1.1943 the vehicles/tanks will have as much as possible the camouflage skin as you can see on the graphic below.

Camo.png

There are still units we only have a grey graphic from. Is someone prepared and able to convert grey units into the exact camouflage skin you see in the graphic for us?

Thanks

Hello Phcas.
Maybe I can help. I have the DCS program with a lot of skins: those included in the program + those of Kondi, Churchlakecity and mine. Here are 3 examples. If you need them, either I send them to you in a private message or I make them for you. On the other hand, I may not have all the masks so you'll have to see with Guille.
Greetings from France. Bruno
Panzer_IVF-2_german_ambush1 Bruno.png
Panzer_IVF-2_T32 Churchlakecity.png
Panzer_IVF-2_wehrmacht43_land Kondi.png

Hi.

This will be very nice but we need exactly the texture that we used already for the other units. I am not shore I have this texture. I will send you a private message to talk about this issue. Thanks.

[glaude1955]

Hello PHCAS,

Thanks for the crews. It's more enjoyable to play with crews than with naked cannons.

For converting gray units to camo units, it would be best if you make available the camo files that were used initially.
Making a mask is not difficult but finding the same pattern is more difficult

Best regards

Yves

[uzbek2012]

How many Goodies ) And calculations have guns + horse-drawn transport ! on the end of the, and the recognized what the war engines until this was , and after all on horses cargo transported perhaps not less )))




https://zen.yandex.ru/media/kuzbasskiy_ ... 00b318dcf4
https://foto-history.livejournal.com/1763257.html


Comparison of the staff of the red Army rifle division and the Wehrmacht is shown in the table
The table shows that the regular strength of the Wehrmacht division exceeds the strength of even a fully deployed division of the red Army. It is interesting that the German rifle division is superior to the Soviet division in the equipment of vehicles, has almost twice as many cars, which is not surprising, and what is surprising is that the horses in the division of the Wehrmacht are also twice as many! This superiority gave the Wehrmacht's infantry divisions a little more mobility. The staff of the cavalry division, see here
http://fablewar.ru/2011/09/division/
THIS IS NOT STALIN , BUT HITLER WOULD BE MORE OF A HORSEMAN
The Red Army entered the Great Patriotic war with only 4 cavalry corps and 13 cavalry divisions
http://fablewar.ru/2012/01/commons/

P.s.

Maxim anti-aircraft machine gun on a wheelbarrow

The mass of cargo placed in a wheelbarrow (Tachanka) consisted of:

Three fighters 80×3 = 240 kg;
Machine gun Assembly 66 kg;
Cartridge boxes 10×5 = 50 kg;
Weapons and personal belongings 17×3 = 21 kg;
Forage for four horses for two days 16×4 = 32 kg;
Provisions for fighters for two days 9×2 = 18 kg
Total – 427 kg.

In some cases, the machinegun cart was moving at a speed of 43-54 km / h off-road.



https://zen.yandex.ru/media/worldoftank ... 72b61a28bd

[phcas]

Hello PHCAS,

Thanks for the crews. It's more enjoyable to play with crews than with naked cannons.

For converting gray units to camo units, it would be best if you make available the camo files that were used initially.
Making a mask is not difficult but finding the same pattern is more difficult

Best regards

Yves

Hi Yves,

It seems I found the camo skin. I am in contact with Bruno now. We are doing some tests.

Thanks

[glaude1955]

Hello Phcas,

Okay, if you need more additional or complementary help, don't hesitate.

Best regards

Yves

[phcas]

Preview.jpg (77.46 KiB) Viewed 2353 times

x01620_Hudson_MkI.png (64.23 KiB) Viewed 2353 times

x01629_Hudson_MkIII.png (75.64 KiB) Viewed 2353 times

[phcas]

x02629_PBO-1_Hudson.png (69.97 KiB) Viewed 2352 times

x20620_Hudson_MkIII.png (62.28 KiB) Viewed 2352 times

Thanks to Wurschtmaxe

[nono hard et heavy]

Hello Phcas & AKRebel.
Phcas gave me Panzer IIIs to camouflage. Here is an overview of the work. Criticism and advice are welcome.
France takes the lead .
Greetings from France.
Bruno.

GER_PzKpfw_III_N - Panzerkampfwagen III_KwK 37_Camo Standard 2-DUSTY.png (32.34 KiB) Viewed 2270 times

[guille1434]

Hello Bruno:

I think you should give to the base icon more contrast and a little less brightness... If the base icon is too bright and it has low contrast, the skin file will obliterate the details of the base icon, giving as a result the look of a "flat" and undetailed model.

[nono hard et heavy]

Hello Bruno:

I think you should give to the base icon more contrast and a little less brightness... If the base icon is too bright and it has low contrast, the skin file will obliterate the details of the base icon, giving as a result the look of a "flat" and undetailed model.

Hello Guille.
As always, you are the best of us for skins. Your advice is right. I haven't thought about it. I applied camouflage on the models Phcas gave me. I had to create the thumbnail myself. What values of contrast and brightness did you use? And we are talking about the model (Panzer III N) before applying the skin.
Greetings from France and muchas gracias amigo.
Bruno

[nono hard et heavy]

Hello Guille.
if you look at what Phcas wants on page 116 of this topic, I think I'm close to his request. Maybe the colours should be a little bit darker.
Bruno

[guille1434]

Hola mi amigo Bruno:

I use Paint.Net software for editing graphic archives for PzCorps, the options I mention in my previous posts are the ones you can see in the image attached here. I think that the problem is that If you use the new Pz III variants icons that phcas uploaded here in form of previews (I think were made by AK Rebel), they look Ok in the basic, plain, panzer-grey color scheme, but if you use them as base icon to apply on them any camo skin (specially dark ones), those colors obscure (in my opinion) the base icon details. It´s a question of trying several combinations of different graduations of brightness/darkness and contrats between base icon and skin file.

[phcas]

About the colors of German camouflage the problem that in the units we already have in camo most of the time the wheel section is much to dark so all details of the wheels are gone. To improve that and also update the units with the new grey tank graphics from AKRebel as basic graphics, we need a level of brightness that save the wheel details on the graphics.

PZIII.png (24.65 KiB) Viewed 2124 times

[phcas]

Help Needed - Command Tanks

Hi everybody. We have more and more graphics of Command (Befehl) tanks but not realy a good role for them in the game. At the moment this units are nopurchase in the game and show up in small numbers in some scenarios. How does the forum look to this units? Do you want them in the purchase screen and what must the role be than? Please tell us.

Example: Command units in the purchase list. Max strength 5. Spotting 2. 50% the cost of the normal panzer. Reconmove.

x00023_BefehlPanzer_III_K_KwK39.png (74.44 KiB) Viewed 2119 times

x00023_BefehlPanzer_III_M_KwK39.png (74.81 KiB) Viewed 2119 times

[phcas]

x00020_Panzer_III_SK1N_KwK37.png (68.92 KiB) Viewed 2107 times

x00020_Panzer_III_SK1N_KwK37x.png (74.42 KiB) Viewed 2107 times

[nono hard et heavy]

Hello.
Some explanations for DCS. Let's take an example: Panzer IVF from Guille BaseIconsetMasks. On picture 1, you can see that the tracks are very dark. So, if you apply the skin, the tracks train will not come out and will be even darker. So: adjustment and level ...
2nd picture: the central adjustment is 1.00 as indicated by the red arrow.
3rd picture: I have set the centre to 0.60. Maybe it's too light but the tracks are clearly visible. 0.40 0.45 0.50 are values to try.
Message for Guille: can you give me the download link if you have the latest version of your Icons&Masks database.
Greetings.
Bruno

Image 1.png (67.4 KiB) Viewed 2090 times

Image 2.png (60.14 KiB) Viewed 2090 times

Image 3.png (57.88 KiB) Viewed 2090 times

[phcas]

Hello.
Some explanations for DCS. Let's take an example: Panzer IVF from Guille BaseIconsetMasks. On picture 1, you can see that the tracks are very dark. So, if you apply the skin, the tracks train will not come out and will be even darker. So: adjustment and level ...
2nd picture: the central adjustment is 1.00 as indicated by the red arrow.
3rd picture: I have set the centre to 0.60. Maybe it's too light but the tracks are clearly visible. 0.40 0.45 0.50 are values to try.
Message for Guille: can you give me the download link if you have the latest version of your Icons&Masks database.
Greetings.
Bruno

In the AKRebel Panzer-III grey serie the tracks/wheels are good visible and will also be that in the camo version.

What I did in the past is to take 2 versions of the graphic, normal and light. Than remake the normal unit by place the light tracks over it.

[nono hard et heavy]

Hello.
Some explanations for DCS. Let's take an example: Panzer IVF from Guille BaseIconsetMasks. On picture 1, you can see that the tracks are very dark. So, if you apply the skin, the tracks train will not come out and will be even darker. So: adjustment and level ...
2nd picture: the central adjustment is 1.00 as indicated by the red arrow.
3rd picture: I have set the centre to 0.60. Maybe it's too light but the tracks are clearly visible. 0.40 0.45 0.50 are values to try.
Message for Guille: can you give me the download link if you have the latest version of your Icons&Masks database.
Greetings.
Bruno

In the AKRebel Panzer-III grey serie the tracks/wheels are good visible and will also be that in the camo version.

What I did in the past is to take 2 versions of the graphic, normal and light. Than remake the normal unit by place the light tracks over it.

Yes, I agree.
May be it's too much hard for me
I'm not pro likes Guille. I tried many solutions, many options to make better skins.

[phcas]

May be it's too much hard for me
I'm not pro likes Guille. I tried many solutions, many options to make better skins.

No you are doing fine. We also can go for this solution, it only is more work.

PHCAS.png (47.63 KiB) Viewed 2035 times

[glaude1955]

Hello all,

You can also use DCS just for the track part.
The color pink (255-0-220) is used to modify the brightness.
At the bottom left of DCS, there is a place titled "Use secondary color (Tracks etc)"

Best regards

Yves