DX11 feature level 10.0

[Retributarr]

Problem locating a good source to download and install... "DX11 feature level 10.0":
Almost every site I went to had some kind of a 'Gimmik' to sell me this or that or whatever else other side deal in order to have then the 'Privilege ' of downloading their precious file of DX11.

So... i'm looking for a good clean source to access to download and install... the..."DX11 feature level 10.0".

I did find some information in my travels...
***Windows 10 should have already come with DX11 support, usually these errors stem from a bad driver.

Hit Windows key + R then enter: dxdiag

***You should be in the DirectX Diagnostic Tool (after a short prompt asking if you want to be checked for signed drivers). Go into the Display tab, and on the right under the Drivers section, look for Feature Levels, if 11_0 is missing, you'll need to download and reinstall your graphics driver.
My... "feature levels" or available 'DirectX' -versions are...
10_1,10_0,9_3,9_2,9_1 That's all she wrote!.

I have checked my 'Graphics-Driver'... the ' Windows-Update Service' has determined that i have the best driver available installed.

***You see the error DX11 feature level 10.0 is requires to run the engine when your computer doesn’t have the required Direct3D hardware feature level. This means that your game is unable to use Direct3D feature level 10.0. {Ret: This is where I am at!!!}

And a "Diagnotic-Utility" from 'Microsoft'... gave me this information...
***DirectX Setup has determined that a Newer or Equivalent version of DirectX has been installed already. No installation of DX11 feature level 10.0 is necessary.

So!!!... what can I do???... this Microsoft feed-back insinuates... that I should be "Good-To-Go!"... however I am 'NOT!'.

I have 'Fixed'/'Re-activated'.. my 3TB Seagate Hard-Drive...its come back-to-life...and also now appears on my 'Desktop'... and in the mean-time... I have also 'Re-Downloaded and installed the Panzer Corps 2' Game.

However!... I am still 'Unable-To-Run' it [Panzer Corps 2]... with this "DirectX" issue unresolved!. I am 'Up-the-Creek' as the saying goes... so now I would greatly appreciate and use some useful help!l

[Patrick Ward]

Problem locating a good source to download and install... "DX11 feature level 10.0":

So is this a very recent problem with a specific update?

Pat

[Retributarr]

Problem locating a good source to download and install... "DX11 feature level 10.0":

So is this a very recent problem with a specific update?

Pat

I wouldn't say it quite that way myself!. The "Problem" was/is that my 3TB-Hard Drive Crashed/Died... because of using it for 'Back-Up' purposes... as well as downloading all of my 'Games' onto it... I completely filled/Maxed-Out that 'External-USB' Hard-Drive.

So... I got my USB-External Hard-Drive back up and running [With very great difficulty]… I didn't change anything on the Computer with 'Updates' or otherwise. Diagnostic-Tools from Microsoft... indicate to me that I am missing the... DX11 feature level 10.0 … .

My... "feature levels" or available 'DirectX' -versions are...
10_1,10_0,9_3,9_2,9_1

That's why I am 'Screaming' for help to get 'DX11'. This now!... is the 'Heart of the Problem'... that I am dealing with... to now be able to 'Download and Install... the "DX11 feature level 10.0"… or to come up with some kind of work a round!.

[fluffybunnyuk]

I remember a couple of years ago this being an nvidia driver bug.
I would go with nvidia drivers over microsofts if its an nvidia card.

Are you sure your graphics card supports DX11?

We really need you to run "dxdiag" and "save all information", and upload the dump.
We'd have a better chance of diagnosis then.

[Retributarr]

DirectX Diagnostic Tool - Report _ Short-Version:
My main Gaming Computer had serious starting up issues... it just wouldn't start up for more than a few seconds or minutes... then... just die on me... so I had to 'Park-It'... until it can be fixed... in the meantime i'm using this Computer for the time being.
------------------
System Information
------------------
Time of this report: 7/15/2020, 05:45:11
Machine name: RICHARD-PC
Machine Id: {F89DA1C6-5C56-471C-A047-CD12C34B0578}
Operating System: Windows 10 Home 64-bit (10.0, Build 19041) (19041.vb_release.191206-1406)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite P300
BIOS: PhoenixBIOS 4.0 Release 6.1 (type: BIOS)
Processor: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz (2 CPUs), ~2.1GHz
Memory: 4096MB RAM
Available OS Memory: 4060MB RAM
Page File: 3980MB used, 976MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 144 DPI (150 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Enabled
Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported
DirectX Database Version: 1.0.8
DxDiag Version: 10.00.19041.0084 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.

---------------
Display Devices
---------------
Card name: ATI Mobility Radeon HD 3650
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x9591)
DAC type: Internal DAC(400MHz)
Device Type: Full Device (POST)
Device Key: Enum\PCI\VEN_1002&DEV_9591&SUBSYS_FF501179&REV_00
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 2298 MB
Dedicated Memory: 506 MB
Shared Memory: 1792 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
HDR Support: Not Supported
Display Topology: External
Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709
Color Primaries: Red(0.639648,0.330078), Green(0.299805,0.599609), Blue(0.150391,0.059570), White Point(0.312500,0.329102)
Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000
Monitor Name: Generic PnP Monitor
Monitor Model: SAMSUNG
Monitor Id: SAM050D
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HDMI
Monitor Capabilities: HDR Not Supported
Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP
Advanced Color: Not Supported
Driver Name: aticfx64.dll,aticfx64.dll
Driver File Version: 8.17.0010.1129 (English)
Driver Version: 8.970.100.9001
DDI Version: 10.1
Feature Levels: 10_1,10_0,9_3,9_2,9_1
Driver Model: WDDM 1.1

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x2937
| Matching Device ID: USB\ROOT_HUB
| Service: usbhub
| Driver: usbhub.sys, 12/7/2019 02:07:56, 528184 bytes
| Driver: usbd.sys, 12/7/2019 02:07:56, 33080 bytes
|
+-+ USB Input Device
| | Vendor/Product ID: 0x046D, 0xC077
| | Location: Port_#0002.Hub_#0001
| | Matching Device ID: USB\Class_03&SubClass_01
| | Service: HidUsb
| | Driver: hidusb.sys, 12/7/2019 02:07:56, 44032 bytes
| | Driver: hidclass.sys, 12/7/2019 02:07:56, 225792 bytes
| | Driver: hidparse.sys, 12/7/2019 02:07:56, 46080 bytes

[fluffybunnyuk]

The HD3650 doesnt support DX11 as far as I know.
Luckily i've got a old one kicking around similar spec in a box so i can go test it. P9700@2.8ghz, HD3650 , 8GB RAM,1TB SSD. Upgraded the parts myself.
Doesnt work on mine due to lack of DX11 support.

[Retributarr]

The HD3650 doesnt support DX11 as far as I know.
Luckily i've got a old one kicking around similar spec in a box so i can go test it. P9700@2.8ghz, HD3650 , 8GB RAM,1TB SSD. Upgraded the parts myself.
Doesnt work on mine due to lack of DX11 support.

I am sensing premonitions of danger... great very-heavy-danger!. I think that the 'Titanic' is sinking?.
There just might be No-Way to fix my 'Wee-Beastie!'.
Nevertheless... this is what drove me to not give up yet.
I have checked my 'Graphics-Driver'... the ' Windows-Update Service' has determined that i have the best drivers available installed. [Graphics Driver]

This is what caused me to lose Hope!.
IF-You see the error DX11 feature level 10.0 is required to run the engine, then your computer doesn’t have the required Direct3D hardware feature level. This means that your game is unable to use Direct3D feature level 10.0. {Ret: This is where I am at!!!}

Thank's Again!... "fluffybunnyuk"... for your voluntary attention in 'Caring to help!'... your effort is appreciated!.

I am hoping against hope.,, that this situation can still be resolved... that it is not yet 'Hopeless!'.

[fluffybunnyuk]

The titanic sank such a very long long long long ... long time ago.

Sadly.

[VPaulus]

With that video card you won't be able to run the game.
You also only have 4GB of RAM and the game requires 8GB.
I'm sorry but you really need a new machine to be able to run the game.

[Retributarr]

With that video card you won't be able to run the game.
You also only have 4GB of RAM and the game requires 8GB.
I'm sorry but you really need a new machine to be able to run the game.

Thanks "VPaulus"for that information... it's good to be certain of where the situation is.
This Computer... was an unused older Computer that I use as an 'Emergency-Backup', I was just 'Hoping-Against-Hope-... that I could still still use it for playing 'PzC2'... but!... that-is... as they say!... "Is-Not-To-Be!!!'.

Question???... if I may encroach upon your person!... I would still like to use that 'Older-Computer'... for my 'Older-Games'... but!... now that 'Festering-Problem' of the... "DX11 feature level 10.0" is 'Required' to play the GAME... keeps endlessly-resurfacing on my Old-Computer-Desktop... so now!!!... The Question:
How can I get 'Rid-of-it'... so that it doesn't get in the way of my being able to use my 'Older-Games?'.

[VPaulus]

In what exact circumstances does this happens? After loading Windows? When you attempt top play another game?

[Retributarr]

In what exact circumstances does this happens? After loading Windows? When you attempt top play another game?

Thank-You!...again "VPaulus" for the 'Reply'!.
Yes!... this 'Irritating' message only 'Pops-Up' when I start a 'Game'... 'Any-Game!'. I have 'No-Idea' as to how to put an end to it. If you or someone has a solution... I sure would appreciate the help!.

Thank-You for "Not Saying"... "I'm from the Government!... and I'm here to help!".

[VPaulus]

I don't have an idea. It should only be saying when running games that needs DX11.
Reinstall your video card drivers, is my best advice.