finally out but don't work
Moderators: Slitherine Core, Gothic Labs
-
theshard92
- Private First Class - Opel Blitz
- Posts: 1
- Joined: Thu Feb 23, 2017 6:34 am
finally out but don't work
I was so happy to see this finally out of early access that I went and bought it. Crash right out of the gate! But wait there is an update! Applied and crash right out of the gate. There is an update button which updated the updater but found no new updates. All I get is a black square in the upper left quarter of my monitor and then a crash report that says I can submit with then attempts to submit but appears to crash as well. running windows 7 on core2duo 2.93ghz with 2gb ram and a radeon hd 5450. Any ideas?
Re: finally out but don't work
Could you please attach a DxDiag report file to your message / reply?
Please attach a DxDiag report fie.
How to get a DxDiag report file:
1. Click on "START" (on Windows 8/10 press “Windows key” and the “R” key at the same time)
2. Click "run" (skip this step on Windows 8/10)
3. Type in "dxdiag" and click "OK"
4. Check through the tabs and perform all tests
5. Click "Save all Information..." and save the text file to a location of your choice
6. Attach the file to your message
7, if your new and can't / don't have permission etc, then copy paste into a reply
please make sure all game pre requisite are installed with the game, even if you think or fully know there are already installed, it will only over write, and it may be that you have a older or newer version of these where as the game in question may need a certain version.
please make sure you are running the latest game version and have up to date drivers installed on your pc,
If you have the original version. So you'll need to update it from the Internet.
Please note that you'll only need the last update, as the updates are comprehensive. (not needed with steam)
Please attach a DxDiag report fie.
How to get a DxDiag report file:
1. Click on "START" (on Windows 8/10 press “Windows key” and the “R” key at the same time)
2. Click "run" (skip this step on Windows 8/10)
3. Type in "dxdiag" and click "OK"
4. Check through the tabs and perform all tests
5. Click "Save all Information..." and save the text file to a location of your choice
6. Attach the file to your message
7, if your new and can't / don't have permission etc, then copy paste into a reply
please make sure all game pre requisite are installed with the game, even if you think or fully know there are already installed, it will only over write, and it may be that you have a older or newer version of these where as the game in question may need a certain version.
please make sure you are running the latest game version and have up to date drivers installed on your pc,
If you have the original version. So you'll need to update it from the Internet.
Please note that you'll only need the last update, as the updates are comprehensive. (not needed with steam)
Re: finally out but don't work
Also, if the crash report will not submit (which usually only happens if it cannot connect to the internet - I would check firewall settings for that one), please copy the report and paste in a message here so that we can get a look at it.
Re: finally out but don't work
If the crash report mentions "freetype6.dll" I had this same crash when I first installed Sovereignty. I fixed it by updating my 2 year old NVIDIA drivers.theshard92 wrote:I was so happy to see this finally out of early access that I went and bought it. Crash right out of the gate! But wait there is an update! Applied and crash right out of the gate. There is an update button which updated the updater but found no new updates. All I get is a black square in the upper left quarter of my monitor and then a crash report that says I can submit with then attempts to submit but appears to crash as well. running windows 7 on core2duo 2.93ghz with 2gb ram and a radeon hd 5450. Any ideas?