Page 1 of 1
Terrain - Gully ?
Posted: Fri Mar 06, 2009 3:06 am
by Keith
Has anyone got a some pictures of how you might model a gully ?
Posted: Fri Mar 06, 2009 5:15 am
by expendablecinc
I dont have a picture but pretty good ones are easy with a few sheets of 2mm card and a stanley knife.
- decide the shape of your gully in total and trace it onto 4 pieces of card.
- cut the middle out of one so you end up with a gasket shaped band with a hole in the middle
- do another one with a slightly smaller hole
- do a third with an even smaller hole
glue them all together onto the fourth as a base piece.
paint and flock the lot
It will look like a depression with contour lines but will not be too thick at the edges to look odd.
Posted: Fri Mar 06, 2009 8:35 am
by lawrenceg
expendablecinc wrote:I dont have a picture but pretty good ones are easy with a few sheets of 2mm card and a stanley knife.
- decide the shape of your gully in total and trace it onto 4 pieces of card.
- cut the middle out of one so you end up with a gasket shaped band with a hole in the middle
- do another one with a slightly smaller hole
- do a third with an even smaller hole
glue them all together onto the fourth as a base piece.
paint and flock the lot
It will look like a depression with contour lines but will not be too thick at the edges to look odd.
Another way is to cut a single piece of card or whatever, paint it a dark colour, then spray a lighter colour around the edge so it fades out towards the middle.
Posted: Sun Mar 08, 2009 11:34 pm
by Blathergut
