Page 1 of 1
How to set trigger to be activated by other triggers
Posted: Sun Aug 06, 2017 9:23 am
by best75
From the screenshot below I do I make it so when the triggers "Base 1 raided" and "Base 2 Raided" are activated the trigger "Both Bases raided is activated.
I tried using set trigger state either it is not the one one or I am doing it wrong
Re: How to set trigger to be activated by other triggers
Posted: Sun Aug 06, 2017 9:49 am
by best75
Also can I get help with how to set a trigger to activate when a bridge is destroyed. Below the strength of the bridge is set to 0 but its not activating when the bridge is destroyed.
Re: How to set trigger to be activated by other triggers
Posted: Mon Aug 07, 2017 7:12 am
by best75
I figured it out. To get trigger to be activated by other tigger I needed to untick the enabled box. To set it use the trigger is activated when the bridge is destroyed I need to set strength to 1. These things weren't clear to me.
Re: How to set trigger to be activated by other triggers
Posted: Mon Aug 07, 2017 10:48 am
by adherbal
Yes, the bridge status UI is wrong. It should display a toggle instead of a textfield. 1 means "dead", 0 means "alive".