Page 143 of 191
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Wed May 15, 2019 3:12 pm
by flakfernrohr
Thank you old comrade Guille1434, yes I am still around, haunting the boards, playing Panzer Corps. I know it is the way of the world with games, but it would be really great if some of the old guys would begin to participate again (myself included instead of just "haunting" the boards).
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Wed May 15, 2019 3:29 pm
by guille1434
Hello old chaps! I am glad to see both of you (Flak & Asuser) still around here! I agree with you, Flak... It would be nice if all the old (and new) members post something here instead of just lurking in silence... It would be nice to put some "life" in this forum...
Asuser: Well, to call those Volkssturm guys "elite" is like stretching things a bit, but I have some glider borne Fallschirmjager Artillery (with experimental switches) in combat testing and training.

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Wed May 15, 2019 9:16 pm
by Akkula
Woahhh Master Flak is back!

Nice to see you again friend.
Great new icons and animations as usual Guille, thanks a lot.
Best regards,
Akkula.
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Sat May 18, 2019 5:08 am
by flakfernrohr
It is nice to hear from my old comrades. I lurk on the boards mostly, but I have a fairly large group of units I have made and have never posted to the boards for anyone if they may want them. I will organize them and post them in the near future. I am pretty rusty, but I believe I can get the "hang" of it again. They always say you "loose it if you don't use it" and that's the case with me sometimes, also rusty, cobwebs in my memory. The irony is that I have loved Panzer Corps longer than a couple of wives.
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu May 23, 2019 10:36 am
by uzbek2012
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Fri May 24, 2019 12:14 am
by captainjack
One Vickers Medium image. The barrel edns were aligned as best I could with the 7TP, so you should be able to use the animations for that (be warned that I haven't tried it yet)
attachment=0]Vickers_Med.png[/attachment]
I'm thinking along the lines of
Move 4, SA4, HA4, GD4 AD 5 CD2 (lots of MGs).
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Fri May 24, 2019 12:18 am
by captainjack
Also Guille1434 is there a description of the different move types in your equipment file?
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Fri May 24, 2019 2:24 pm
by guille1434
Hello!
Some answers:
- Uzbek: Eventually, I want to make all units from all nations, the more, the better... The problem is my available time, so the answer would be "yes" but I cannot make promises.
-CaptJack: Thanks for sharing your Vickers Medium!
Besides, I believe I forgot to upload the info about movement types for my mod. Here is the movement types file and its associated graphics... Enjoy!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Fri May 24, 2019 10:04 pm
by captainjack
Thanks for the movement file. Once I've been through this, I should be ready to re-start my British Expeditionary Force mod.
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Tue Jun 04, 2019 3:15 pm
by guille1434
Hello:
This time, a British desert aircraft unit pack, with a new skin...
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Tue Jun 11, 2019 2:38 am
by guille1434
The Jagdpanzer 38(d)... A very interesting concept that did not reach production, but it would have been, with no doubt, series produced if the war had lasted more and the conditions in Germany were better.
This variant was basically an enlarged Pz 38(t) hull with a new diesel engine, but keeping the transmission and other proven components of the original design. Thanks to AKRebel, who uploaded a lot of excellent icons, I made this "what if" variant (which actually existed as as paper project) which was a tank destroyer with a 7,5 cm L/70 gun (Similar to the one used in the Panther tank). I plan to make a whole family based on this chassis, something like a "Heer 46" combat vehicle family...
Enjoy!
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Tue Jun 11, 2019 3:19 am
by guille1434
...And the SS camouflaged version...

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Tue Jun 11, 2019 4:45 am
by cw58
Oooooo, very nice!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 2:44 pm
by guille1434
Another member of the "universal" Pz 38(d) family, and, of course a "what if" unit... The Pzkpfw 38(d) mit PzIV Drehturm (which was, I think a simplified version of the regular, long gun Pz IV turret).
Again, thanks go to AKRebel for sharing such a nice group of icons!!
Note that I updated the Jagdpanzer 38(d) mit 7,5 cm L70 gun icons (regular and SS versions) posted earlier.
Enjoy!!
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 3:39 pm
by AKRebel
Hello guille1434, the 38 (d) variants look very good. Keep up the good work, you'll create great units as well, and I hope to see many new units from you. Many Thanks
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 3:45 pm
by guille1434
Hello AK! Thanks for your nice words... But the truth is that I had in mind to make icons for a 38(d) family of vehicles from a long time but never found inspiration nor suitable stuff to work from, so it is fair to say that those units are the fruit of your work also. Thanks Again!
About stuff and documentation, I want to share this poster with many project drawings for the Pz 38 family. May be you find some inspiration for new units.
Greetings and I wish you keep having found designing icons and sharing with all of us here for this marvelous game!!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 4:26 pm
by AKRebel
I will keep trying ...

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 4:28 pm
by AKRebel
These vehicles I already have in planning, or are already partially created. However, it takes some time to create new units. The time will tell. Thank you
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Thu Jun 13, 2019 6:49 pm
by guille1434
It's ok as long as it is fun for you, friend... Take your time, but above all, enjoy it!
I will tell you what units I am planning to make in order to complete the Pz 38(d) family, in case you want to avoid duplicate efforts and may be using part of what I upload here to help you with your projects...
- Aufklärungspanzer 38(d) mit 2cm KwK38 (based on your posted icon, I already made it with three switches: AT, Recon and AA)
- Aufklärungspanzer 38(d) mit 5cm KwK39 (a heavy recon variant with the Puma 8x8 vehicle turret. I could not find any evidence of a projected unit like that, but it will look cool)

- Panzer 38(d) Morsertrager mit 12 cm GrW
- Panzer 38(d) Infantry Support Tank with Pz III N turret and PzIII model schurzen or wire mesh Von Thoma shields (heavily protected to deal with infantry type units in close terrain) ---> Another fantasy project
- Vollkettenaufklärer 38(d) (An armored personnel carrier, again I could just find info about the vehicle that was made based on the Pz38(t) chassis, but no info about a Pz38(d) variant, one more "highly what if" unit)
- Flammpanzer 38(d)
- 10,5 cm StuH 42 auf Jagdpanzer 38(d) (in AT and indirect fire switches)
- 15 cm sIG 33 auf Jagdpanzer 38(d)
- Flakpanzer 38(d) Kugelblitz
- 8,8 cm Waffenträger 38(d)
That's all at present...
Greetings!
Re: Guille's PzCorps Support Base - Multipurpose Icons and more.
Posted: Fri Jun 14, 2019 7:13 pm
by AKRebel
Hello guille1434, thanks for your support. Please do not be angry with me if I maybe optically adapt or change one or the other unit of them. I hope that's ok for you, because I really appreciate your work as well.